Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||
PC 8900 is translucent, ignition-resistant Polycarbonate resin. This resin halogen free flame retardant and is intended to comply with global environmental standards. It is an easy processing PC resin suitable for use in IR PC film or sheet extrusion. It has UL 94 flammability rating of 0.5 mm V-0 | |||||
General | |||||
Form | Resin Pellets | ||||
Feature |
Non-Brominated & Non- Chlorinated Flame Retardant |
||||
UL Yellow Card | E206114-100167435 |
||||
Physical | Nominal Value | Test Method | |||
Density / Specific Gravity | 1.21 g/cm³ | ||||
Melt Flow | 13 g/10min | ASTM D1238 | |||
Linear Mold Shrinkage, Flow | 0.50 - 0.70 % | ASTM D955 | |||
Mechanical | Nominal Value | Test Method | |||
Tensile Modulus(Thickness; 3.2 mm) | 2020 MPa | ASTM D638 | |||
Tensile Strength, Break(Thickness; 3.2 mm) | 67.0 MPa | ASTM D638 | |||
Elongation at Yield(Thickness; 3.2 mm) | 110 % | ASTM D638 | |||
Flexural Modulus(Thickness; 3.2 mm) | 2920 MPa | ASTM D790 | |||
Flexural Yield Strength(Thickness; 3.2 mm) | 103 MPa | ASTM D790 | |||
Izod Impact, Notched(Thickness; 3.2 mm;Temperature; 23 °C) | 110 J/m | ASTM D256 | |||
Thermal | Nominal Value | Test Method | |||
Heat Distortion Temperature[HDT] Unannealed;Load; 0.45 MPa Unannealed;Load; 1.8 MPa |
98.9 °C 86.1 °C |
ASTM D648 | |||
Vicat Softening Point(Rate B/120) | 114 °C | ASTM D1525 | |||
CTE, Flow | 6.5E-5 cm/cm/°C | ASTM D696 | |||
Flammability, UL94(Thickness; 0.5 mm) | V-0 | UL 94 | |||
Electrical | Nominal Value | Test Method | |||
Volume Resistivity | 2.1E+17 ohms ·cm | ASTM D257 | |||
Dielectric Strength | 12 kV/mm | ASTM D149 | |||
Processing | Nominal Value | ||||
Processing Temp, Melt<Injection> | 260 - 290 °C | ||||
Drying Temperature<Injection> | 100 °C | ||||
Drying Time<Injection> | 4.0 hr |
Suppliers with verified business licenses