Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||||||
EXL7414L polycarbonate (PC) siloxane copolymer resin is a medium flow, non-chlorinated, non- brominated flame retardant opaque grade. This resin offers excellent low temperature ductility (-40C), extremely thin wall flame retardant capability with UL94 V0 at 0.6mm, and in combination with excellent processability and release with opportunities for shorter cycle times compared to standard PC.EXL7414L resin is a product available in wide range of opaque colors and excellent candidate for a wide variety of applications, such as the battery cover of fast-charging mobile phones that need to be compliant with IEC62368-1. |
|||||||||
General | |||||||||
Form Resin Pellets | |||||||||
Feature |
Non-Brominated & Non- Chlorinated Flame Retardant |
Ductile Low Temperature Impact Excellent Processability | High Impact Flame Retardant |
||||||
Appliances Lighting Applications Electronic Displays | |||||||||
Uses |
Equipment | Electrical Engineering Medical Device | |||||||
Outdoor Electrical Personal Care | |||||||||
Applications | |||||||||
Physical Nominal Value Test Method | |||||||||
Density / Specific Gravity 1.20 g/cm³ | ASTM D792;ISO 1183 |
||||||||
Melt Mass-Flow Rate, MFR(300 °C;1 .2 kg) 11 g/10min ASTM D1238 | |||||||||
Melt Volume-Flow Rate, MVR(300 °C;1 .2 kg) 10 cm³/ 10 min ISO 1133 | |||||||||
Molding Shrinkage, Across Flow(3.2 mm) 0.40 - 0.80 % Internal Method | |||||||||
Molding Shrinkage, Flow(3.2 mm) 0.40 - 0.80 % Internal Method | |||||||||
Rockwell Hardness, L-Scale 84 ASTM D785 | |||||||||
Rockwell Hardness, R-Scale 117 ASTM D785 | |||||||||
Mechanical Nominal Value Test Method | |||||||||
Tensile Modulus | |||||||||
50 mm/min 2150 MPa ASTM D638 | |||||||||
2180 MPa ISO 527-1/1 | |||||||||
Tensile Strength, Yield | |||||||||
50 mm/min;Type I 53.0 MPa ASTM D638 | |||||||||
54.0 MPa ISO 527-2/50 | |||||||||
Tensile Strength, Break | |||||||||
50 mm/min;Type I | 57.0 MPa 47.0 MPa |
ASTM D638 ISO 527-2/50 |
|||||||
Tensile Elongation, Yield | |||||||||
50 mm/min;Type I | 5.3 % 5.3 % |
ASTM D638 ISO 527-2/50 |
|||||||
Tensile Elongation, Break | |||||||||
50 mm/min;Type I | 90 % 80 % |
ASTM D638 ISO 527-2/50 |
|||||||
Flexural Modulus | |||||||||
1.3 mm/min;50 mm;Span | 2220 MPa | ASTM D790 | |||||||
2 mm/min | 2200 MPa | ISO 178 | |||||||
Flexural Stress, at Yield(2 mm/min) | 81.0 MPa | ISO 178 | |||||||
Flexural Stress, Yield(1.3 mm/min;50 mm;Span) | 87.0 MPa | ASTM D790 | |||||||
C harpy Notched Impact Strength -30 °C;80 23 °C;80 |
67 kJ/m² 79 kJ/m² |
ISO 179/1eA | |||||||
Notched Izod Impact | |||||||||
-40 °C | 600 J/m | ASTM D256 | |||||||
-30 °C | 690 J/m | ASTM D256 | |||||||
0 °C | 830 J/m | ASTM D256 | |||||||
23 °C | 890 J/m | ASTM D256 | |||||||
-30 °C;80*10*3 mm | 70 kJ/m² | ISO 180/1A | |||||||
23 °C;80*10*3 mm | 74 kJ/m² | ISO 180/1A | |||||||
Instrumented Dart Impact, Total Energy -30 °C 23 °C |
67.0 J 72.0 J |
ASTM D3763 | |||||||
Thermal | Nominal Value | Test Method | |||||||
Deflection Temperature Under Load, Unannealed 0.45 MPa;3.2 mm 1.8 MPa;3.2 mm 80*10*4 mm;0.45 MPa;4 mm;64 mm;Span 80*10*4 mm;1.8 MPa;4 mm;64 mm;Span |
116 °C 104 °C 117 °C 106 °C |
ASTM D648 ASTM D648 ISO 75-2/Bf ISO 75-2/Af |
|||||||
Vicat Softening Temperature | 124 °C 123 °C |
ISO 306/B120 ISO 306/B50 |
|||||||
CLTE, Flow -40 - 40 °C 23 - 80 °C |
8.0E-5 cm/cm/°C 9.0E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
|||||||
CLTE, Transverse -40 - 40 °C 23 - 80 °C |
9.0E-5 cm/cm/°C 1.0E-4 cm/cm/°C |
ASTM E831 ISO 11359-2 |
|||||||
Flame Rating > 0.6 mm > 3 mm |
V-0 5VB |
UL 94 | |||||||
Glow Wire Flammability Index(1 mm) | 960 °C | IEC 60695-2-12 | |||||||
Glow Wire Ignition Temperature [GWIT](1 mm) | 850 °C | IEC 60695-2-13 | |||||||
Oxygen Index | 37 % | ISO 4589-2 | |||||||
Electrical | Nominal Value | Test Method | |||||||
Surface Resistivity | > 1.0E+16 ohms | ASTM D257 | |||||||
Volume Resistivity | > 1.0E+16 ohms ·cm | ASTM D257 | |||||||
Dielectric Constant 1.1e+9 Hz 1.9e+9 Hz 5.0e+9 Hz 1.0e+10 Hz |
2.86 2.81 2.81 2.84 |
Internal Method | |||||||
Dissipation Factor 1.1e+9 Hz 1.9e+9 Hz 5.0e+9 Hz 1.0e+10 Hz |
0.065 6.0E-3 6.0E-3 6.0E-3 |
Internal Method | |||||||
Processing | Nominal Value | ||||||||
Drying Temperature<Injection> | 110 °C | ||||||||
Drying Time<Injection> | 3.0 - 4.0 hr | ||||||||
Suggested Max Moisture<Injection> | 0.020 % | ||||||||
Suggested Shot Size<Injection> | 40 - 60 % | ||||||||
Rear Temperature<Injection> | 270 - 295 °C | ||||||||
Middle Temperature<injection> | 280 - 305 °C | ||||||||
Front Temperature<Injection> | 295 - 315 °C | ||||||||
Nozzle Temperature<Injection> | 290 - 310 °C | ||||||||
Processing Temp, Melt<Injection> | 295 - 315 °C | ||||||||
Mold Temperature<Injection> | 70 - 95 °C | ||||||||
Back Pressure<Injection> | 0.300 - 0.700 MPa | ||||||||
Screw Speed <Injection> | 40 - 70 rpm | ||||||||
Vent Depth <Injection> | 0.025 - 0.076 mm | ||||||||
Drying Time, Cumulative<Injection> | 48 hr |
Suppliers with verified business licenses