Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Implant PEEK Pellet for Neurosurgery and Maxillofacial Repair Chemical Machinery Diy
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html PEEK
Product Description | |||||
Features: Corrosion resistance, flame retardancy, low smoke resistance, abrasion resistance, wave permeability, excellent electrical insulation properties, high toughness, Applications: Multifilament, Monofilament, Screws, Seal Rings, Bearings, Circuit Boards | |||||
General | |||||
Form Resin Pellets | |||||
Ductile Fda Low Smoke | |||||
Insulating Transparent To Microwave | |||||
Uses |
Bcf Multifilaments Industrial Parts | Bearings Monofilaments |
Seals Printed Circuit Boards |
||
Physical Nominal Value Test Method | |||||
Density / Specific Gravity ISO 1183 | |||||
Crystalline 1.3 g/cm³ | |||||
Amorphous 1.26 g/cm³ | |||||
Durometer Hardness, Shore D(23 ºC) 85 ISO 868 | |||||
Water Absorption at Saturation(23 ºC;3.2 mm;by immersion;thick Tensile Bar) | 0.07 % ISO 62-1 | ||||
Water Absorption at Equilibrium(23 ºC;3.2 mm;by immersion;thick Tensile Bar) | 0.4 % ISO 62-1 | ||||
Mold Shrinkage, MD 1 % ISO 294-4 | |||||
Mold Shrinkage, TD 1.3 % ISO 294-4 | |||||
Melt Flow Rate[MFR](5 kg;380 ºC) 20 g/10 min ISO 1133 | |||||
Mechanical Nominal Value Test Method | |||||
Tensile Strength, Break(23 ºC) 100 MPa ISO 527 | |||||
Elongation at Yield(23 ºC) 40 % ISO 527 | |||||
Flexural Strength(23 ºC) 170 MPa ISO 178 | |||||
Flexural Modulus(23 ºC) 4200 MPa ISO 178 | |||||
Compressive Strength(23 ºC) 125 MPa | |||||
C harpy Impact Strength, Notched 6 kJ/m² ISO 604 | |||||
Notched Izod Impact Strength 6.5 kJ/m² ISO 180 | |||||
Mold Shrinkage, TD 1.3 % ISO 294-4 | |||||
Thermal | Nominal Value | Test Method | |||
Melting Point | 343 °C | ISO 11357 | |||
Glass Transition Temp, Tg(onset) | 143 °C | ISO 11357 | |||
Specific Heat Capacity(23 ºC) | 2.2 kg/ºC | DSC | |||
CTE, Flow | 45 ppm/K | ISO 11359 | |||
CLTE, Transverse | 120 ppm/K | ISO 11359 | |||
Deflection Temperature(1.8 MPa) | 152 °C | ISO 75-f | |||
Thermal Conductivity(23 ºC) | 0.29 W/m-K | ISO 22007-4 | |||
Electrical | Nominal Value | Test Method | |||
Dielectric Strength(2mm) | 23 kV/mm | IEC 60243-1 | |||
Comparative Tracking Index | 150 V | IEC 60112 | |||
Dielectric Constant 23 ºC;1.0e+3 Hz 50 Hz;23 ºC |
3.2 4.5 |
IEC 60250 | |||
Dielectric Loss - Tangent(23 ºC;1.0e+6 Hz) | 0.003 | IEC 60250 | |||
Volume Resistivity 23 ºC;1 V 275 ºC |
1.0E+16 ohms ·cm 1.0E+9 ohms ·cm |
IEC 60093 |
Forever Co.,Ltd
Suppliers with verified business licenses