Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||
Description Halogen Free Flame Retardant, Heat Resistant Chemical Resistance, High Impact Application IT/OA Housing and Components (Adaptor) | |||||
General | |||||
Form | Resin Pellets | ||||
Feature |
Non-Brominated & Non- Chlorinated Flame Retardant |
Chemical Resistant High Impact |
Good Thermal | ||
UL Yellow Card | E248280-101511247 | ||||
Uses | Housing | ||||
Physical Nominal Value | Test Method | ||||
Density / Specific Gravity 1.20 g/cm³ | ASTM D792 | ||||
Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) 13 g/10min | ASTM D1238 | ||||
Molding Shrinkage - Flow, Injection Molded(23 °C;3.2 mm) | 0.50 - 0.80 % | ASTM D955 | |||
Mechanical Nominal Value | Test Method | ||||
Tensile Strength, Yield, Injection molded(50 mm/min;23 61.8 MPa °C;3.2 mm) |
ASTM D638 | ||||
Tensile Elongation, Break, Injection Molded(50 mm/min;23 °C;3.2 mm) | 100 % | ASTM D638 | |||
Flexural Modulus, Injection Molded(10 mm/min;23 °C;3.22160 MPa mm) | ASTM D790 | ||||
Flexural Strength, Injection Molded(10 mm/min;23 °C;3.296.1 MPa mm) |
ASTM D790 | ||||
Notched Izod Impact, Injection Molded -30 °C;3.2 mm 23 °C;3.2 mm |
120 J/m 740 J/m |
ASTM D256 | |||
Thermal | Nominal Value | Test Method | |||
Deflection Temperature Under Load, Unannealed, Injection Molded(1.8 MPa;6.4 mm) | 123 °C | ASTM D648 | |||
Vicat Softening Temperature(120 °C/h;50 N;Rate B;Loading 2) | 135 °C | ASTM D1525 | |||
RTI Elec | 80.0 °C | UL 746 | |||
RTI Imp | 80.0 °C | UL 746 | |||
RTI Str | 80.0 °C | UL 746 | |||
Flame Rating 1.5 mm 2 mm |
V-0 V-0 - 5VB |
UL 94 | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 90 - 100 °C | ||||
Drying Time<Injection> | 3.0 - 4.0 hr | ||||
Suggested Max Moisture<Injection> | 0.020 % | ||||
Rear Temperature<Injection> | 270 - 285 °C | ||||
Middle Temperature<injection> | 275 - 290 °C | ||||
Front Temperature<Injection> | 275 - 290 °C | ||||
Nozzle Temperature<Injection> | 270 - 285 °C | ||||
Processing Temp, Melt<Injection> | 275 - 290 °C | ||||
Mold Temperature<Injection> | 80 - 100 °C | ||||
Back Pressure<Injection> | 1.96 MPa | ||||
Screw Speed <Injection> | 40 - 80 rpm |
Suppliers with verified business licenses