Application: | Motor, Electric Cars, Motorcycle, Machinery, Marine, Toy, Agricultural Machinery, Car |
---|---|
Hardness: | Hardened Tooth Surface |
Gear Position: | Internal Gear |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
ITEM NO: POM C 13021 XAP-XH
FEATURE: Injection grade
General |
|||
Form |
Resin Pellets |
||
Chemical Resistant Fuel Resistant Excellent Processability |
|||
Feature Good Hardness High Impact Hydrolysis Resistance |
|||
Solvent Resistant Fda Alkali Resistant |
|||
Usage |
Appliances Automotive |
Engineering Parts Engineered |
Thin-walled Parts Electrical |
Physical Nominal Value Test Method |
|||
Density / Specific Gravity 1.41 g/cm³ ISO 1183 |
|||
Melt Volume-Flow Rate, MVR(190 °C;2.16 kg) 12 cm³/10 min ISO 1133 |
|||
Molding Shrinkage, Across Flow 1.8 % ISO 294-4 |
|||
Molding Shrinkage, Flow 2.0 % ISO 294-4 |
|||
Water Absorption, Saturation(23 °C) 0.65 % ISO 62 |
|||
Water Absorption, Equilibrium(50% RH;23 °C) 0.20 % ISO 62 |
|||
Ball Indentation Hardness(30s) 143 MPa ISO 2039-1 |
Mechanical |
Nominal Value |
Test Method |
Tensile Modulus |
2900 MPa |
ISO 527-2/1A |
Tensile Stress, Yield |
65.0 MPa |
ISO 527-2/1A/50 |
Tensile Strain, Yield |
9.0 % |
ISO 527-2/1A/50 |
Nominal Tensile Strain at Break |
25 % |
ISO 527-2/1A/50 |
Tensile creep modulus 1 hr 1.0e+3 hr |
2500 MPa 1300 MPa |
ISO 899-1 |
Flexural Modulus(23 °C) |
2800 MPa |
ISO 178 |
C harpy Notched Impact Strength -30 °C 23 °C |
6.0 kJ/m² 6.5 kJ/m² |
ISO 179 1eA |
C harpy Unnotched Impact Strength -30 °C 23 °C |
200 kJ/m² 200 kJ/m² |
ISO 179 1eU |
Thermal |
Nominal Value |
Test Method |
Heat Deflection Temperature, Unannealed(1.8 MPa) |
106 °C |
ISO 75-2/A |
Vicat Softening Temperature |
151 °C |
ISO 306/B50 |
Melting Point(10 °C/min) |
166 °C |
ISO 11357-3 |
CLTE, Flow |
1.1E-4 cm/cm/°C |
ISO 11359-2 |
Flame Rating 1.5 mm 3 mm |
HB HB |
UL 94 |
Specific Heat Capacity of Melt |
2210 J/kg/°C |
|
Melt Thermal Conductivity |
0.16 W/m-K |
Internal Method |
NOTICE: The data contained are based on our current knowledge and experience. This information may be subject to revision without informing in advance as new knowledge and experience become available. Because use conditions and applicable laws may differ from one location to another and may change with time, Customer is responsible for determining whether products and the information in t his document are appropriate for Customer's use and for ensuring that Customer's workplace and disposal practices are in compliance with applicable laws. Seller assumes no obligation or liability for the information in this document.