Feature: | Plastics |
---|---|
CAS No.: | 63440-93-7 |
Formula: | C24h24o8 |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | |||||||
CYCOLOY C6600 Polycarbonate/Acrylonitrile Butadiene Styrene (PC/ABS) blend is an injection moldable non chlorinated/brominated flame retardant grade with balanced flow, impact and hydrolytic stability. It also offers good chemical resistance and colorability in opaque colors. It has a UL94 [email protected] and [email protected] flame rating. | |||||||
General | |||||||
Form | Resin Pellets | ||||||
Feature | Non-Brominated Ductile | Non-Chlorinated Hydrolysis Resistance |
Excellent Processability | ||||
UL Yellow Card | E207780-228478 | ||||||
Appliances Lighting Applications Automotive Lighting | |||||||
Automotive Under The H d | |||||||
oo | Fluid Handling | Lawn And Garden E i t |
|||||
Uses | qu pmen | ||||||
Nuclear Power A li ti | |||||||
pp ca ons | Automotive Exterior | Automotive Interior | |||||
Constraction | Household Applications | Outdoor | |||||
Physical | Nominal Value | Test Method | |||||
Density / Specific Gravity | 1.19 g/cm³ | ASTM D792 | |||||
Melt Mass-Flow Rate, MFR(260 °C;2.16 kg) | 22 g/10min | ASTM D1238 | |||||
Molding Shrinkage, Flow(3.2 mm) | 0.40 - 0.60 % | Internal Method | |||||
Water Absorption(24 hr) | 0.11 % | ASTM D570 | |||||
Mechanical | Nominal Value | Test Method | |||||
Tensile Modulus(50 mm/min) | 3000 MPa | ASTM D638 | |||||
Tensile Strength, Yield(50 mm/min;Type I) | 63.0 MPa | ASTM D638 | |||||
Tensile Strength, Break(50 mm/min;Type I) | 49.0 MPa | ASTM D638 | |||||
Tensile Elongation, Yield(50 mm/min;Type I) | 4.0 % | ASTM D638 | |||||
Tensile Elongation, Break(50 mm/min;Type I) | 80 % | ASTM D638 | |||||
Flexural Modulus(1.3 mm/min;50 mm;Span) | 2620 MPa | ASTM D790 | |||||
Flexural Strength, Yield(1.3 mm/min;50 mm;Span) | 94.0 MPa | ASTM D790 | |||||
Notched Izod Impact(23 °C) | 550 J/m | ASTM D256 | |||||
Instrumented Dart Impact, Total Energy | ASTM D3763 | ||||||
-30 °C | 51.0 J | ||||||
23 °C | 51.0 J |
Thermal | Nominal Value | Test Method |
Deflection Temperature Under Load, Unannealed 0.45 MPa;6.4 mm 1.8 MPa;3.2 mm 1.8 MPa;6.4 mm |
98.0 °C 83.0 °C 90.0 °C |
ASTM D648 |
Vicat Softening Temperature(50 °C/h;50 N;Rate A;Loading 2) | 99.0 °C | ASTM D1525 |
RTI Elec | 80.0 °C | UL 746 |
RTI Imp | 70.0 °C | UL 746 |
RTI Str | 80.0 °C | UL 746 |
Flame Rating 0.75 mm 1.5 mm 2 mm |
V-2 V-0 5VB |
UL 94 |
Electrical | Nominal Value | Test Method |
Surface Resistivity | > 1.0E+15 Ohms | IEC 60093 |
Volume Resistivity | > 1.0E+15 Ohms ·cm | IEC 60093 |
Electric Strength, in Oil(3.2 mm) | 17 kV/mm | IEC 60243-1 |
Relative Permittivity 50 Hz 60 Hz 1.0e+6 Hz |
2.70 2.70 2.70 |
IEC 60250 |
Dissipation Factor 50 Hz 60 Hz 1.0e+6 Hz |
4.0E-3 4.0E-3 6.0E-3 |
IEC 60250 |
Processing | Nominal Value |
Drying Temperature<Injection> | 80 - 90 °C |
Drying Time<Injection> | 3.0 - 4.0 hr |
Suggested Max Moisture<Injection> | 0.040 % |
Suggested Shot Size<Injection> | 30 - 80 % |
Rear Temperature<Injection> | 220 - 255 °C |
Middle Temperature<injection> | 220 - 275 °C |
Front Temperature<Injection> | 245 - 275 °C |
Nozzle Temperature<Injection> | 245 - 275 °C |
Processing Temp, Melt<Injection> | 245 - 275 °C |
Mold Temperature<Injection> | 60 - 80 °C |
Back Pressure<Injection> | 0.300 - 0.700 MPa |
Screw Speed <Injection> | 40 - 70 rpm |
Vent Depth <Injection> | 0.038 - 0.076 mm |
Drying Time, Cumulative<Injection> | 8 hrs |
Suppliers with verified business licenses