| Feature: | Hydrolytic Degradable |
|---|---|
| CAS No.: | 25037-45-0 |
| Formula: | 9002-81-7 |
| Samples: |
customize according to your exact requirements
|
|---|
| Customization: |
|---|
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
| Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
Suppliers with verified business licenses
Audited Supplier 945DU-XH resin, a high-quality polycarbonate resin that delivers durability and reliability in a range of applications. With a MFR of 10 and MVR of 10, this resin is designed with impact modification that delivers low-temperature ductility, even under harsh conditions. This top-of-the-line product is also UV stabilized and includes mold release. The non-chlorinated, non-brominated flame retardant system ensures UL94 V0, 5VA, 5VB compliance. Available in a variety of opaque colors, 945DU-XH resin is an excellent choice for versatile applications.
| General | |||
| Form | Resin Pellets | ||
| Electronic Displays Electrical Engineering Electrical Household electrics |
|||
| Physical | Nominal Value | Test Method | |
| Density / Specific Gravity | 1.20 g/cm³ | ASTM D792;ISO 1183 |
|
| Melt Mass-Flow Rate, MFR(300 °C;1.2 kg) | 10 g/10min | ASTM D1238 | |
| Melt Volume-Flow Rate, MVR(300 °C;1.2 kg) | 10 cm³/10 min | ISO 1133 | |
| Molding Shrinkage, Across Flow(3.2 mm) | 0.50 - 0.70 % | Internal Method | |
| Molding Shrinkage, Flow(3.2 mm) | 0.50 - 0.70 % | Internal Method | |
| Water Absorption(24 hr;23 °C) | 0.050 % | ISO 62 | |
| Rockwell Hardness, M-Scale | 50 | ASTM D785 | |
| Rockwell Hardness, R-Scale | 118 | ASTM D785 | |
| Mechanical | Nominal Value | Test Method | |
| Tensile Modulus 50 mm/min |
2250 MPa 2300 MPa |
ASTM D638 ISO 527-1/1 |
|
| Tensile Strength, Yield 50 mm/min;Type I |
57.0 MPa 58.0 MPa |
ASTM D638 ISO 527-2/50 |
|
| Tensile Strength, Break 50 mm/min;Type I |
60.0 MPa 60.0 MPa |
ASTM D638 ISO 527-2/50 |
|
| Tensile Elongation, Yield 50 mm/min;Type I |
6.0 % 6.0 % |
ASTM D638 ISO 527-2/50 |
|
| Tensile Elongation, Break 50 mm/min;Type I |
100 % 95 % |
ASTM D638 ISO 527-2/50 |
|
| Flexural Modulus 1.3 mm/min;50 mm;Span 2 mm/min |
2250 MPa 2300 MPa |
ASTM D790 ISO 178 |
| Flexural Stress, at Yield(2 mm/min) | 90.0 MPa | ISO 178 |
| Flexural Stress, Yield(1.3 mm/min;50 mm;Span) | 95.0 MPa | ASTM D790 |
| Charpy Notched Impact Strength -40 °C;80 -30 °C;80 23 °C;80 |
56 kJ/m² 58 kJ/m² 64 kJ/m² |
ISO 179/1eA |
| Charpy Unnotched Impact Strength(23 °C;80) | No Break | ISO 179/1eU |
| Notched Izod Impact -40 °C -30 °C 23 °C -40 °C;80*10*3 mm -30 °C;80*10*3 mm 23 °C;80*10*3 mm |
520 J/m 600 J/m 700 J/m 50 kJ/m² 55 kJ/m² 65 kJ/m² |
ASTM D256 ASTM D256 ASTM D256 ISO 180/1A ISO 180/1A ISO 180/1A |
| Unnotched Izod Impact(23 °C) | No Break | ASTM D4812;ISO 180/1U |
| Thermal | Nominal Value | Test Method |
| Deflection Temperature Under Load, Unannealed | ||
| 0.45 MPa;3.2 mm | 134 °C | ASTM D648 |
| 1.8 MPa;3.2 mm | 120 °C | ASTM D648 |
| 80*10*4 mm;0.45 MPa;4 mm;64 mm;Span | 134 °C | ISO 75-2/Bf |
| 80*10*4 mm;1.8 MPa;4 mm;64 mm;Span | 120 °C | ISO 75-2/Af |
| Vicat Softening Temperature | ||
| 50 °C/h;50 N;Rate A;Loading 2 | 145 °C 143 °C |
ASTM D1525;ISO 306/B120 ISO 306/B50 |
| Ball Pressure Test(123 - 127 °C) | Pass | IEC 60695-10-2 |
| CLTE, Flow -40 - 40 °C 23 - 80 °C |
7.0E-5 cm/cm/°C 7.2E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
| CLTE, Transverse -40 - 40 °C 23 - 80 °C |
7.1E-5 cm/cm/°C 7.5E-5 cm/cm/°C |
ASTM E831 ISO 11359-2 |
| Thermal Conductivity | 0.27 W/m-K |
ASTM C177 |
| 0.96 W/m-K | ASTM E1530 | |
| Flame Rating, Testing by SABIC 1.2 mm 2 mm 3 mm |
V-0 5VB 5VA |
UL 94 |
| Glow Wire Flammability Index(1 mm) | 960 °C | IEC 60695-2-12 |
| Glow Wire Ignition Temperature [GWIT](1 mm) | 875 °C | IEC 60695-2-13 |
| Electrical | Nominal Value | Test Method |
| Surface Resistivity | > 1.0E+17 ohms | IEC 60093 |
| Volume Resistivity | > 1.0E+17 ohms·cm | IEC 60093 |
| Dielectric Constant 1.1e+9 Hz 1.9e+9 Hz 5.0e+9 Hz 1.0e+10 Hz 2.0e+10 Hz |
2.90 2.90 2.90 2.70 2.70 |
ASTM D150 |
| Dissipation Factor 1.1e+9 Hz 1.9e+9 Hz 5.0e+9 Hz 1.0e+10 Hz 2.0e+10 Hz |
6.0E-3 5.0E-3 6.0E-3 5.0E-3 6.0E-3 |
ASTM D150 |
| Processing | Nominal Value | |
| Drying Temperature<Injection> | 120 °C | |
| Drying Time<Injection> | 3.0 - 4.0 hr | |
| Suggested Max Moisture<Injection> | 0.020 % | |
| Suggested Shot Size<Injection> | 40 - 60 % | |
| Rear Temperature<Injection> | 260 - 280 °C | |
| Middle Temperature<injection> | 265 - 290 °C | |
| Front Temperature<Injection> | 275 - 300 °C | |
| Nozzle Temperature<Injection> | 270 - 295 °C | |
| Processing Temp, Melt<Injection> | 275 - 300 °C | |
| Mold Temperature<Injection> | 70 - 95 °C | |
| Back Pressure<Injection> | 0.300 - 0.700 MPa | |
| Screw Speed<Injection> | 40 - 70 rpm | |
| Vent Depth<Injection> | 0.025 - 0.076 mm | |
| Drying Time, Cumulative<Injection> | 48 hr |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}