Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
This grade is targeted for electrical vehicle battery pack insulation sheet/film
https://forever-plastics.en.made-in-china.com/product-list-1.html
Product Description | |||||
NHP8000VT3 resin is a non-reinforced blend of polyphenylene ether (PPE) + polystyrene (PS) designed for high heat resistance, ultra-thin-wall FR and High tracking resistance performance. This extrusion and injection moldable grade contains non-brominated, non-chlorinated flame retardant and carries CTI 600V / PLC 0 and UL94 flame rating of V0 at 0.25mm. NHP8000VT3 is based on a unique co-polymer technology and exhibits high impact, high heat resistance, dimensional stability, hydrolytic stability, strong electrical performance, low moisture absorption and low specific gravity. This grade is targeted for electrical vehicle (EV) battery pack insulation sheet/film, bus bar insulation layer and other high voltage electric components. |
|||||
General | |||||
Form Resin Pellets | |||||
Low Warpage Low Shrinkage Non-Brominated | |||||
Feature |
Chlorinated Flame Retardant | Good Thermal Hydrolysis Resistance Li ht W i ht |
|||
g mpac ow o s ure g - e g | |||||
Hood | |||||
Household electrics Energy Storage | |||||
Physical Nominal Value Test Method | |||||
Density / Specific Gravity 1.10 g/cm³ ISO 1183 | |||||
Melt Mass-Flow Rate, MFR(300 °C;5 kg) 12 g/10min ASTM D1238 | |||||
Molding Shrinkage, Flow 0.73 % Internal Method | |||||
Molding Shrinkage, Across Flow 0.79 % Internal Method | |||||
Water Absorption(24 hr;23 °C) 0.040 % ISO 62 | |||||
Mechanical | Nominal Value | Test Method | |||
Tensile Modulus(5 mm/min) | 2490 MPa | ASTM D638 | |||
Tensile Strength, Yield(5 mm/min;Type I) | 66.8 MPa | ASTM D638 | |||
Tensile Elongation, Yield(5 mm/min;Type I) | 4.2 % | ASTM D638 | |||
Tensile Elongation, Break(5 mm/min;Type I) | 11 % | ASTM D638 | |||
Flexural Modulus(1.3 mm/min;50 mm;Span) | 2600 MPa | ASTM D790 | |||
Flexural Strength(1.3 mm/min;50 mm;Span) | 108 MPa | ASTM D790 | |||
Notched Izod Impact -40 °C 23 °C |
84 J/m 210 J/m |
ASTM D256 | |||
Unnotched Izod Impact -40 °C 23 °C |
1800 J/m No Break |
ASTM D4812 | |||
Thermal | Nominal Value | Test Method | |||
Deflection Temperature Under Load, Unannealed 0.45 MPa;3.2 mm 1.8 MPa;3.2 mm |
150 °C 133 °C |
ASTM D648 | |||
Vicat Softening Temperature 50 °C/h;10 N;Rate A;Loading 1 50 °C/h;50 N;Rate A;Loading 2 |
166 °C 155 °C |
ASTM D1525 | |||
Ball Pressure Test(123 - 127 °C) | Pass | IEC 60695-10-2 | |||
Ball Pressure Test, Approximate Maximum(140 °C) | Pass | IEC 60695-10-2 | |||
Flame Rating(> 0.25 mm) | V-0 | UL 94 | |||
Electrical | Nominal Value | Test Method | |||
Surface Resistivity | 7.5E+16 ohms | ASTM D257 | |||
Volume Resistivity | 6.2E+15 ohms ·cm | ASTM D257 | |||
Comparative Tracking Index, CTI | PLC 0 | UL 746A | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 100 - 120 °C | ||||
Drying Time<Injection> | 3.0 - 5.0 hr | ||||
Rear Temperature<Injection> | 280 - 330 °C | ||||
Middle Temperature<injection> | 280 - 330 °C | ||||
Front Temperature<Injection> | 280 - 330 °C | ||||
Nozzle Temperature<Injection> | 250 - 330 °C | ||||
Processing Temp, Melt<Injection> | 280 - 330 °C | ||||
Mold Temperature<Injection> | 70 - 120 °C | ||||
Back Pressure<Injection> | 3.00 - 8.00 MPa | ||||
Screw Speed <Injection> | 20 - 100 rpm |
Forever Co.,Ltd
Suppliers with verified business licenses