Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Polyamine Nylon66 high strength and stiffness combined with high heat deflection
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | ||||
Material code according PA66 Heat stabilized Nylon 66 reinforced by 40 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long. Parts molded of have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment. |
||||
General | ||||
Form | Resin Pellets | |||
Filler | 40 % Long Glass Fiber | |||
Feature |
Low Warpage | Corrosion Resistant | Creep Resistance | |
Good Dimensional | ||||
Uses | Metal Replacement | |||
Physical | Nominal Value | Test Method | ||
Density, dry | 1.46 g/cm³ | ISO 1183 | ||
Condition: Density | 1.46 g/cm³ | ISO 1183 | ||
Mechanical | Nominal Value | Test Method | ||
Dry: Tensile Modulus | 13700 MPa | ISO 527-2/1A | ||
Condition: Tensile Modulus | 10000 MPa | ISO 527-2/1A | ||
Dry: Tensile Stress, Break | 190 MPa | ISO 527-2/1A/5 | ||
Condition: Tensile Stress, Break | 160 MPa | ISO 527-2/1A/5 | ||
Dry: Tensile Strain, Break | 1.6 % | ISO 527-2/1A/5 | ||
Condition: Tensile Strain, Break | 2.0 % | ISO 527-2/1A/5 | ||
Dry: Flexural Modulus 23 °C 80 °C |
12600 MPa 8000 MPa |
ISO 178 | ||
Condition: Flexural Modulus 23 °C 80 °C |
10000 MPa 7000 MPa |
ISO 178 | ||
Dry: Flexural Stress 23 °C 80 °C |
260 MPa 250 MPa |
ISO 178 | ||
Condition: Flexural Stress 23 °C 80 °C |
250 MPa 210 MPa |
ISO 178 | ||
Dry: Charpy Notched Impact Strength -30 °C 23 °C |
23 kJ/m² 23 kJ/m² |
ISO 179 1eA | ||
Condition: Charpy Notched Impact Strength(23 °C) | 18 kJ/m² | ISO 179 1eA | ||
Dry: Charpy Unnotched Impact Strength -30 °C 23 °C |
41 kJ/m² 40 kJ/m² |
ISO 179 1eU | ||
Condition: Charpy Unnotched Impact Strength(23 °C) | 45 kJ/m² | ISO 179 1eU | ||
Dry: Notched Izod Impact Strength -30 °C 23 °C |
35 kJ/m² 24 kJ/m² |
ISO 180/1A | ||
Notched Izod Impact Strength: condition(23 °C) | 19 kJ/m² | ISO 180/1A | ||
Thermal | Nominal Value | Test Method | ||
Dry: Heat Deflection Temperature, Unannealed | ||||
1.8 MPa | 255 °C | ISO 75-2/A | ||
8 MPa | 240 °C | ISO 75-2/C | ||
Dry: Melting Temperature(10 °C;min) | 261 °C | ISO 11357-3 | ||
Processing | Nominal Value | |||
Drying Temperature<Injection> | 70 - 80 °C | |||
Drying Time<Injection> | 2.0 - 4.0 hr | |||
Suggested Max Moisture<Injection> | 0.15 % | |||
Hopper Temperature<Injection> | 70 - 80 °C | |||
Rear Temperature<Injection> | 265 - 275 °C | |||
Middle Temperature<injection> | 275 - 285 °C | |||
Front Temperature<Injection> | 285 - 295 °C | |||
Nozzle Temperature<Injection> | 305 - 315 °C | |||
Processing Temp, Melt<Injection> | 305 - 315 °C | |||
Mold Temperature<Injection> | 90 - 120 °C | |||
Injection Rate<Injection> | Moderate | |||
Back Pressure<Injection> | < 3.00 MPa | |||
Feeding Zone Temperature<Injection> | 20 - 50 °C | |||
Zone4 temperature<Injection> | 295 - 305 °C | |||
Hot Runner Temperature<Injection> | 300 - 315 °C |
Forever Co.,Ltd
Suppliers with verified business licenses