Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA66 Heat stabilized Nylon 66 reinforced by 50 weight percent long glass fibers
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||||
Material code according to ISO 1043-1: PA66 Heat stabilized Nylon 66 reinforced by 50 weight percent long glass fibers. The pellets are cylindrical and normally as well as the embedded fibers 10 mm long. Parts molded of have outstanding mechanical properties such as high strength and stiffness combined with high heat deflection. The notched impact strength is increased at elevated and low temperatures due to the fiber skeleton built in the parts. The long fiber reinforcement reduces creep significantly. The very isotropic shrinkage in the molded parts minimizes the warpage. Complex parts can be manufactured with high reproducibility by injection molding. Can be used for substituting die cast metal with the advantage of Weight reduction, no corrosion problems, no post treatment. | |||||
General | |||||
Form | Resin Pellets | ||||
Filler | 50 % Long Glass Fiber | ||||
Feature |
Low Warpage | Corrosion Resistant | Creep Resistance | ||
Good Dimensional | |||||
Uses | Metal Replacement | ||||
Physical | Nominal Value | Test Method | |||
Density / Specific Gravity | 1.57 g/cm³ | ISO 1183 | |||
Mechanical | Nominal Value | Test Method | |||
Tensile Modulus | 16400 MPa | ISO 527-2/1A | |||
Tensile Stress, Break | 260 MPa | ISO 527-2/1A/5 | |||
Tensile Strain, Break | 2.0 % | ISO 527-2/1A/5 | |||
Flexural Modulus(23 °C) | 15100 MPa | ISO 178 | |||
Flexural Stress(23 °C) | 410 MPa | ISO 178 | |||
Thermal | Nominal Value | Test Method | |||
Melting Point(10 °C/min) | 260 °C | ISO 11357-3 | |||
Processing | Nominal Value | ||||
Drying Temperature<Injection> | 70 - 80 °C | ||||
Drying Time<Injection> | 2.0 - 4.0 hr | ||||
Suggested Max Moisture<Injection> | 0.15 % | ||||
Hopper Temperature<Injection> | 70 - 80 °C | ||||
Rear Temperature<Injection> | 280 - 285 °C | ||||
Middle Temperature<injection> | 280 - 290 °C | ||||
Front Temperature<Injection> | 290 - 300 °C | ||||
Nozzle Temperature<Injection> | 310 - 320 °C | ||||
Processing Temp, Melt<Injection> | 310 - 320 °C | ||||
Mold Temperature<Injection> | 90 - 120 °C | ||||
Injection Rate<Injection> | Moderate | ||||
Back Pressure<Injection> | < 3.00 MPa | ||||
Feeding Zone Temperature<Injection> | 20 - 50 °C | ||||
Zone4 temperature<Injection> | 300 - 310 °C | ||||
Hot Runner Temperature<Injection> | 300 - 315 °C |
Forever Co.,Ltd