Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||
XHT2146 resin is a high flow, high heat polycarbonate copolymer with improved release performance compared to XHT2141 resin. It is available in a range of opaque and limited transparent colors. | ||
General | ||
Form Resin Pellets | ||
Feature Good Thermal | ||
Uses Automotive | ||
Physical Nominal Value Test Method | ||
Density / Specific Gravity 1.2 ASTM D792 1.2 g/cm³ ISO 1183 |
||
Mold Shrinkage, Flow(3.2 mm) 0.6 - 0.9 % Method | ||
Melt Flow Rate[MFR](330 °C;2.16 kgf) 46 g/10min ASTM D1238 | ||
Water Absorption(23 °C;saturated) 0.3 % ISO 62-1 | ||
Moisture Absorption(50% RH;23 °C) 0.23 % ISO 62 | ||
Melt Volume Rate, MVR(2.16 kg;330 °C) 43 cm³/10 min ISO 1133 | ||
Mechanical Nominal Value Test Method | ||
Izod Impact, Notched | ||
23 °C 115 J/m ASTM D256 | ||
-30 °C 75 J/m ASTM D256 | ||
80*10*4;23 °C 11 kJ/m² ISO 180/1A | ||
80*10*4;-30 °C 10 kJ/m² ISO 180/1A | ||
Instrumented Dart Impact, Total Energy(23 °C) 68 J ASTM D3763 | ||
Unnotched Izod Impact Strength ISO 180/1U | ||
unnotched;80*10*3;23 °C 0 NB kJ/m² | ||
unnotched;80*10*3;-30 °C 0 NB kJ/m² | ||
Notched Izod Impact Strength ISO 180/1A | ||
notched;80*10*3;23 °C 0 10 kJ/m² | ||
notched;80*10*3;-30 °C 0 9 kJ/m² | ||
C harpy Impact, V-Notched ISO 179 1eA | ||
23 °C;Edgew;80*10*3;sp =62mm 0 12 kJ/m² | ||
-30 °C;Edgew;80*10*3;sp =62mm 0 9 kJ/m² | ||
23 °C;Edgew;80*10*4;sp =62 mm 0 20 kJ/m² | ||
C harpy Impact, Unnotched 23 °C;Edgew;80*10*3;sp =62mm 0 -30 °C;Edgew;80*10*3;sp =62mm 0 |
NB kJ/m² NB kJ/m² |
ISO 179 1eU |
Tensile Stress, Yield | ||
50 mm/min;Type I | 70 MPa | ASTM D638 |
50 mm/min | 70 MPa | ISO 527 |
Tensile Stress, Break | ||
50 mm/min;Type I | 60 MPa | ASTM D638 |
50 mm/min | 60 MPa | ISO 527 |
Tensile Strain, Yield | ||
50 mm/min;Type I | 6.5 % | ASTM D638 |
50 mm/min | 6.5 % | ISO 527 |
Tensile Strain, Break | ||
50 mm/min;Type I | 90 % | ASTM D638 |
50 mm/min | 90 % | ISO 527 |
Tensile Modulus | ||
5 mm/min | 2600 MPa | ASTM D638 |
1 mm/min | 2600 MPa | ISO 527 |
Flexural Stress, Yield | ||
1.3 mm/min;50 mm;span | 110 MPa | ASTM D790 |
2 mm/min | 100 MPa | ISO 178 |
Flexural Modulus | ||
1.3 mm/min;50 mm;span | 2550 MPa | ASTM D790 |
2 mm/min | 2450 MPa | ISO 178 |
Thermal | Nominal Value | Test Method |
Vicat Softening Temperature | ||
Rate B/50 | 161 °C | ASTM D1525 |
Rate B/50 | 160 °C | ISO 306 |
Rate B/120 | 162 °C | ISO 306 |
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm 3.2 mm;1.82 MPa |
155 °C 145 °C |
ASTM D648 |
CTE, Flow | ||
-40 - 40 °C | 6.0E-05 1/°C | ASTM E831 |
-40 - 40 °C | 6.0E-05 1/°C | ISO 11359-2 |
CTE, XFlow | ||
-40 - 40 °C | 6.0E-05 1/°C | ASTM E831 |
-40 - 40 °C | 6.0E-05 1/°C | ISO 11359-2 |
HDT/Bf(0.45) | 155 °C | ISO 75/Bf |
HDT/Af(1.8) | 142 °C | ISO 75/Af |
Metallized Haze Onset | 155 °C | Method |
Processing | Nominal Value | |
Drying Temperature<Injection> | 125 °C | |
Drying Time<Injection> | 4 - 6 hrs | |
Maximum Moisture Content<Injection> | 0.02 % | |
Melt Temperature<Injection> | 290 - 350 °C | |
Nozzle Temperature<Injection> | 285 - 345 °C | |
Front, Zone 3 Temperature<Injection> | 290 - 350 °C | |
Middle, Zone 2 Temperature<Injection> | 280 - 340 °C | |
Rear, Zone 1 Temperature<Injection> | 270 - 330 °C | |
Mold Temperature<Injection> | 85 - 130 °C | |
Back Pressure<Injection> | 0.3 - 0.7 MPa | |
Screw Speed <Injection> | 40 - 90 rpm | |
Shot To Cylinder Size<Injection> | 40 - 60 % | |
Vent Depth <Injection> | 0.025 - 0.08 mm |