Feature: | Plastics |
---|---|
CAS No.: | 25766-59-0 |
Formula: | C6h4c(CH3)2c6h4oco2-]N |
Samples: |
25kg/bag
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
Product Description | ||||
BX7241 Polycarbonate (PC) is an injection moldable non-chlorinated/brominated, unfilled flame retardant grade that has good impact and processability. It has an MVR of 18 (260°C/2.16kg), UL94 [email protected], 5VA at 3.0mm rating and can be ideal for thin wall applications. |
||||
General | ||||
Form | Resin Pellets | |||
Feature |
High Impact | Diffusive Thin Wall |
Non-Brominated & Non- Chlorinated Flame Retardant |
|
UL Yellow Card | E207780-102078504 | |||
Uses Consumer | Electrical | |||
Physical | Nominal Value | Test Method | ||
Density / Specific Gravity | 1.2 | ASTM D792 | ||
Mold Shrinkage, Flow(3.2 mm) | 0.4 - 0.6 % | SABIC Method | ||
Melt Flow Rate[MFR](260 °C;2.16 kgf) | 18 g/10min | ASTM D1238 | ||
Water Absorption(23 °C;saturated) | 0.2 % | ISO 62-1 | ||
Moisture Absorption(50% RH;23 °C) | 0.1 % | ISO 62 | ||
Melt Volume Rate, MVR(2.16 kg;MVR at 260 °C) | 18 cm³/10 min | ISO 1133 | ||
Mechanical | Nominal Value | Test Method | ||
Izod Impact, Notched | ||||
23 °C | 690 J/m | ASTM D256 | ||
0 °C | 420 J/m | ASTM D256 | ||
-30 °C | 190 J/m | ASTM D256 | ||
80*10*4;23 °C | 28 kJ/m² | ISO 180/1A | ||
80*10*4;0 °C | 11 kJ/m² | ISO 180/1A | ||
80*10*4;-30 °C | 11 kJ/m² | ISO 180/1A | ||
Instrumented Dart Impact, Total Energy(23 °C) | 60 J | ASTM D3763 | ||
C harpy Impact, Notched, Cut 23 °C;80*10*4 0 mm 0 °C;80*10*4 0 mm -30 °C;80*10*4 0 mm |
37 kJ/m² 12 kJ/m² 11 kJ/m² |
ISO 179 1eA |
Tensile Stress, Yield | ||
50 mm/min;Type I | 67 MPa | ASTM D638 |
50 mm/min | 62 MPa | ISO 527 |
Tensile Stress, Break | ||
50 mm/min;Type I | 65 MPa | ASTM D638 |
50 mm/min | 45 MPa | ISO 527 |
Tensile Strain, Yield | ||
50 mm/min;Type I | 4.4 % | ASTM D638 |
50 mm/min | 4.2 % | ISO 527 |
Tensile Strain, Break | ||
50 mm/min;Type I | 100 % | ASTM D638 |
50 mm/min | 90 % | ISO 527 |
Tensile Modulus | ||
5 mm/min | 2500 MPa | ASTM D638 |
1 mm/min | 2500 MPa | ISO 527 |
Flexural Stress, Yield | ||
1.3 mm/min;50 mm;span | 107 MPa | ASTM D790 |
2 mm/min | 99 MPa | ISO 178 |
Flexural Stress, break | ||
1.3 mm/min;50 mm;span | 105 MPa | ASTM D790 |
2 mm/min | 98 MPa | ISO 178 |
Flexural Modulus | ||
1.3 mm/min;50 mm;span | 2450 MPa | ASTM D790 |
2 mm/min | 2600 MPa | ISO 178 |
Thermal | Nominal Value | Test Method |
UL Recognized ≥ 0.5 mm ≥ 0.5 mm ≥ 0.2 mm |
V-0 V-1 V-2 |
UL 94 |
Glow Wire Flammability Index(0.75 mm) | 960 °C | IEC 60695-2-12 |
Glow Wire Ignition Temperature [GWIT] 1 mm 1.5 mm 3 mm |
800 °C 825 °C 825 °C |
IEC 60695-2-13 |
Vicat Softening Temperature Rate B/50 Rate B/50 Rate B/120 |
111 °C 109 °C 112 °C |
ASTM D1525 ISO 306 ISO 306 |
Heat Deflection Temperature[HDT], Unannealed 0.45 MPa;3.2 mm 3.2 mm;1.82 MPa |
103 °C 93 °C |
ASTM D648 |
CTE, Flow -40 - 40 °C -40 - 40 °C |
5.9e-05 1/°C 5.9e-05 1/°C |
ASTM E831 ISO 11359-2 |
CTE, XFlow -40 - 40 °C -40 - 40 °C |
5.9e-05 1/°C 5.9e-05 1/°C |
ASTM E831 ISO 11359-2 |
Ball Pressure Test(75°C +/- 2°C) | Pass | IEC 60695-10-2 |
Relative Temp Index, Elec | 80 °C | UL 746B |
Relative Temp Index, Mechanical with Impact | 80 °C | UL 746B |
Relative Temp Index, Mechanical without Impact | 80 °C | UL 746B |
Electrical | Nominal Value | Test Method |
Volume Resistivity | > 1.0E+16 ohms ·cm | ASTM D257 |
Surface Resistivity | > 2.E+15 ohms | ASTM D257 |
Processing | Nominal Value |
Drying Temperature<Injection> | 80 - 90 °C |
Drying Time<Injection> | 2 - 4 hrs |
Maximum Moisture Content<Injection> | 0.02 % |
Melt Temperature<Injection> | 250 - 300 °C |
Nozzle Temperature<Injection> | 250 - 300 °C |
Front, Zone 3 Temperature<Injection> | 250 - 300 °C |
Middle, Zone 2 Temperature<Injection> | 240 - 290 °C |
Rear, Zone 1 Temperature<Injection> | 230 - 280 °C |
Hopper Temperature<Injection> | 60 - 80 °C |
Mold Temperature<Injection> | 60 - 85 °C |
Vent Depth <Injection> | 0.03 - 0.075 mm |
Suppliers with verified business licenses