Feature: | Oxidative Degradable |
---|---|
CAS No.: | 32131-17-2 |
Formula: | (C12h22n2o2)N |
Samples: |
BAG
|
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
PA66 15%GF Automotive Wheel cover Exterior trim interior trim Electrical components
https://forever-plastics.en.made-in-china.com/product/rJwRvlcdZpWD/China-Nylon-PA6-GF33-PA66-Granules-PA6-with-30GF-Polyamide-PA66-30-GF-PA6-Material.html Heat-conducting nylon
Product Description | |||
Polyamide 66 - Mineral Filled, 15% Automotive: Wheel cover, Exterior trim, interior trim, Electrical components and connectors Electrical & Electronic: Low voltage switch gear/power distribution, Lighting, Power connectors , |
|||
General | |||
Form Resin Pellets | |||
Filler 15 % Mineral | |||
Feature Good Dimensional | |||
Uses | Lighting Applications Automotive Interior | Automotive Connector |
Automotive Exterior Electrical |
Physical Nominal Value Test Method | |||
Density / Specific Gravity 1.23 g/cm³ ASTM D792 | |||
Water Absorption, Saturation(23 °C) 4.5 % ISO 62 | |||
Water Absorption, Equilibrium(50% RH;23 °C) 1.6 % ISO 62 | |||
Mechanical Nominal Value Test Method | |||
Tensile Strength, Break 73.0 MPa ASTM D638 | |||
Tensile Elongation, Break 15 % ASTM D638 | |||
Flexural Strength 105 MPa ASTM D790 | |||
Notched Izod Impact(23 °C) 75 J/m ASTM D256A | |||
Thermal Nominal Value Test Method | |||
Deflection Temperature Under Load, Unannealed ASTM D648 | |||
0.45 MPa 235 °C | |||
1.8 MPa 70.0 °C | |||
Processing Nominal Value | |||
Drying Temperature<Injection> 85 - 90 °C | |||
Drying Time<Injection> 3.0 - 4.0 hr | |||
Rear Temperature<Injection> 270 - 280 °C | |||
Middle Temperature<injection> 280 - 290 °C | |||
Nozzle Temperature<Injection> 275 - 285 °C | |||
Processing Temp, Melt<Injection> 275 - 285 °C | |||
Mold Temperature<Injection> 55 - 80 °C |
Forever Co.,Ltd
Suppliers with verified business licenses